Brewer Access· Manual Exam Table with a 500 lb. Patient Weight Capacity!
 Here's a traditional style box table with a higher weight capacity and extra features!
Features largest storage capacity, largest most secure step and stable four leg design.
Includes comfortable, ergonomic upholstery, convenient table paper storage and a simple pneumatic lift backrest.
Patented pass-through drawers allow for left or right access. This eliminates right and left hand set-up problems.
Drawer stops are provided to allow drawers to open from just one side if desired.
Table length: 57.3", extends to 71". Table width: 28". Table height: 32". Leg extension length: 15". Step width & length: 20.4" x 17.7". Step height: 8". Paper roll holder accepts 21" x 3½" and 18" x 3½" paper rolls. Storage exists for up to 6 additional rolls under top. Includes hospital grade duplex electrical outlet. Warranty: 5 years. To view upholstery colors: Click here.
|
#5000 Brewer 1/08 Access Table:
(w/ Standard Uphol.)
Normally: $1,742
Your cost: $1,393*
______________
#5001 Brewer Access Table w/ pelvic tilt & drawer heater:
(w/ Standard Uphol.)
Normally: $1,825
Your cost: $1,460*
______________
Add a #15100 Basic Exam Incandescent 25 Watt Light:
Normally: $158
Your cost: $105
#100165, Optional 5 Caster Base: $35 |
Please answer these questions when ordering an exam table shown on this page:
 1) What vinyl upholstery color do you want? ________ (See colors shown below or contact us and we'll mail you a color swatch card) Also, do you need a matching stool or treatment cabinet? _________2) Do you want dock to dock delivery, hydraulic liftgate delivery, inside delivery or inside delivery with set-up? Note: Prices on this page do not include freight. Freight is FOB Factory and based upon quantity, table size, weight, destination and specific delivery requirements. Freight is pre-paid & added to bill.
Please Note:
 Please call or e-mail us with the above information & we'll fax/ e-mail you a quote with the freight cost.The #6190 & 6196 Tables require some assembly. Assembly may be available but at an additional cost.
Note: All of the tables shown on this page are custom, made-to-order w/ your color upholstery & non-returnable.
|
Clinton Full Cabinet Bariatric Treatment Table
600 lb. weight capacity
Dimensions: 78"l x 31"w x 31"h.
Includes 3 storage areas, each with an adjustable shelf. Doors have concealed, self-closing Euro-style hinges. |
#6160 This table features 2" high density urethane foam padding. Features a furniture-grade laminated plywood cabinet frame.
Plywood tops are secured in place with a tee nut fastening system. Stress points are reinforced with angles.
Cabinets are assembled using steel fasteners and metal supports.
See Clinton laminate wood finish and upholstery color choices below. |
Updated 9/07
#6160 Bariatric Table
Normally: $1,690
Your cost: $1,347
All prices quoted are
FOB Factory. Freight is pre-paid and added to invoice. No deliveries to residential addresses.
|
Clinton Industries Bariatric Treatment Table
w/ 600 lb. weight capacity.
Dimensions: 78"l x 31"w x 31"h.
Includes laminate shelf w/ H-braces. Pillow included.
|
#6190 This table includes 2" high density urethane foam padding, a plywood top and a solid hardwood 6 leg design with triple bolted corner legs.
Table also has built-in middle leg levelers and steel reinforced frame.
Top is secured in place with a tee nut fastening system. Stress points are reinforced with angles. Available in Natural or Dark Cherry Wood Finish. See Clinton upholstery color choices below.
Note: Legs must be bolted to top frame. Some assembly is required. |
#6190 Bariatric Table
Normally: $735
Your cost: $586
All prices quoted are
FOB Factory. Freight is pre-paid and added to invoice. No deliveries to residential addresses.
|
Clinton Low Height Bariatric Treatment Table
w/ 600 lb. weight capacity & lower height.
Dimensions: 78"l x 30"w x 26"h.
Includes laminate shelf w/ H-braces. Pillow included.
|
#6196 This table includes 2" high density urethane foam padding, a plywood top and a solid hardwood 6 leg design with triple bolted corner legs.
It also has built-in middle leg levelers and steel reinforced frame.
Top is secured in place with a tee nut fastening system. Stress points are reinforced with angles. Available in Natural or Dark Cherry Wood Finish. See Clinton upholstery color choices below.
Note: Legs must be bolted to top frame. Some assembly is required. |
#6196 Low Height Bariatric Table
Normally: $735
Your cost: $586
All prices quoted are
FOB Factory. Freight is pre-paid and added to invoice. No deliveries to residential addresses.
|
Clinton Bariatric Echo-Image Cabinet Style Table
600 lb. weight capacity
Dimensions: 78"l x 33"w x 28"h. Note: There is ample storage in the easy-to-clean laminated compartments. |
#6115 Specifically designed for left lateral echo cardiology, this table features 2" thick high density padding and sturdy 4 panel upright construction.
The 10" x 12" hinged drop leaf is held in place with a steel bar for safety.
Heavy-duty construction throughout. Large pillow is included. (not shown)
Please call us for a catalog showing laminate color choices. See Clinton laminate wood finish and upholstery color choices below. |
#6115 Bariatric Table
Normally: $2,375
Your cost: $1,893
All prices quoted are
FOB Factory. Freight is pre-paid and added to invoice. No deliveries to residential addresses.
|
Winco Bariatric Treatment Table
with a 1,000 lb. weight capacity.
Available in 3 different heights.
Dimensions: 72¾"l x 36½"w x 30"h. Weight: 87 lbs.
Note: 18" and 25" table heights are also available.
|
#890 Winco Bariatric Table features a heavy gauge expanded vinyl and a comfortable medium density foam for superior comfort.
A high strength steel frame with a 1,000 lb. weight capacity allows you to accomodate your largest patients.
A reinforced cross brace for superior strength and stability is included.
Standard paper roll holder and adjustable glides are included.
Available in a variety of upholstery colors. See below. |
#890 Bariatric
30" Height Table:
Normally: $703
Your cost: $599
_____________
#89025 Bariatric
25" Height Table:
Normally: $742
Your cost: $635
_____________
#89018 Bariatric
18" Height Table:
Normally: $742
Your cost: $635
All prices quoted are
FOB Factory. Freight is pre-paid and added to invoice. No deliveries to residential addresses.
|
Winco Bariatric Treatment Table with a
1,000 lb. weight capacity and storage shelf.
Available in 3 different heights. Shelf is included.
Dimensions: 72¾"l x 36½"w x 30"h. Weight: 123 lbs.
Note: 18" and 25" table heights are also available.
|
#890 Winco Bariatric Table features a heavy gauge expanded vinyl and a comfortable medium density foam for superior comfort.
A high strength steel frame with a 1,000 lb. weight capacity allows you to accomodate your largest patients.
A reinforced cross brace is under the shelf for superior strength and stability.
Standard paper roll holder and adjustable glides are included.
Available in a variety of upholstery colors. See below. |
#890S Bariatric
30" Height Table:
Normally: $824
Your cost: $706
_____________
#89025-S Bariatric
25" Height Table:
Normally: $861
Your cost: $738
_____________
#89018-S Bariatric
18" Height Table:
Normally: $861
Your cost: $738
All prices quoted are
FOB Factory. Freight is pre-paid and added to invoice. No deliveries to residential addresses.
|
Clinton Industries Bariatric Table Accessories |
A) #003 Slide Out Shelf - Accessible from either side of table; 9" wide. $76
B) #004 Drawer - Euro-style drawer with metal sides, laminate bottom & ends. Holds up to 75 lbs. $104
#005 Special Height - 36" maximum, 24" minimum. State desired ht. to top of pad on table. $41
#006 Special Length - Classic & ETA, 78" maximum, 48" minimum length. $25
When ordering state desired length of table top.
C) #008 Armboard - Adjustable in height and angle. Includes two mounting brackets. $157
D) #009 Nosehole - Permits patients to lie face down without turning head. 9" long x 2" wide. $30
E) #010 Stirrups - Adjustable in height, angle and length. Heels are nylon coated; stirrup bars are chrome plated. Specify table type when ordering. $166
F) #020 Small Pillow - Dimensions: 14" x 12" x 3" $22
#060 Large Pillow - Dimensions:14" x 21" x 3" $34
G/H) #034 Paper dispenser/ cutter combo. $34
G) #030 Paper Dispenser - Accomodates paper rolls 18" to 21" wide. $28
H) #040 Paper Cutter - Clear plastic with elastic straps. $10
I) #077 Safety Strap - 2" x 92" strap secures with quick fasten hook and loop fastener. $40 |
  Do you need exam room stools with matching vinyl upholstery?
|
Clinton Bariatric Foot Stool
600 lb. weight capacity
|
#6142 Bariatric Foot Stool has a chrome-plated base, reinforced "X" base construction and a rubber tread top for safety. Size: 14¼"l x 11¼"w x 9" h.
Note: The Bariatric Foot Stool is not available with a handle because of potential tipping and patient injury issues. Also, because these handles are screwed on, the manufacturer is also concerned about the handle bending and breaking if a lot of weight and force were to be applied to the handle. |
#6142 Bariatric Foot Stool
Normally: $70
Your cost: $56
Free shipping
for any quantity within the contiguous 48.
No residential deliveries. |
Clinton Extra Large Step Stool
600 lb. weight capacity
|
#6110 Extra Large Step Stool
This step stool with heavy-duty wood construction features a 1" thick laminated plywood base, steel reinforced stress points and safety tread top.
Includes a solid bolt-thru design and easy-grip cut outs.
Size: 23"l x 23"w x 8"h.
Available in sand color only. |
#6110 Extra Large Foot Stool
Normally: $245
Your cost: $195
All prices quoted are FOB Factory. Freight is pre-paid and added to invoice. Prices are subject to change
without notice. |
Brewer Vinyl Upholstery Colors
Due to variation in monitor displays, actual colors may vary. Since colors may not be exactly as shown, we invite you to call us. We will send you the actual color chart, which provides a more accurate depiction of the vinyl you will receive on your chair. Other colors not shown may require minimum quantities or an additional charge. Would you like this stool to match the color of your exam table? If so, tell us the manufacturer and vinyl color of your exam table. We will make every effort to match it. All stools are custom, made to order and non-returnable. |
Please call us for a catalog that includes an upholstery color chart and laminate colors.
Clinton Industries- Standard Upholstery Colors:
Slate Blue Desert Tan Tomato
China Green Yellow Black
Clinton Industries- Color Coordinated Upholstery Colors:
(Same cost but they do match Clinton casework colors)
Gunmetal Dove Grey Cream
Clamshell Wedgewood Royal Blue
Emerald Mulberry Purplegray
Burgundy
Due to variation in monitor displays, actual colors may vary.
Please call us for a catalog that includes an upholstery color chart and laminate colors.
Since colors may not be exactly as shown, we can mail you the actual color chart for your review.
This will provide you with a more accurate depiction of the vinyl you will receive on your chair.
Please e-mail or call us at 817 424-1744 or 1 888 424-1740. Go to our contact page to send us an e-mail.
|
Clinton Industries Door, Drawer and Cabinet Top Laminate Colors:
Natural 2NT Dark Cherry 2DC Slate Gray 2SG Gray 2GR
Fossil 2FS Sand 2SD Aztec Blue 2AB Deep Blue 2DB
Imperial Green 2IG Wild Rose 2WR Sangria 2SG
Base Laminate Color Choices: (Frame & Leg)
Natural 1NT Dark Cherry 1DC Slate Gray 1SG
Gray 1GR Fossil 1FS Sand 1SD
Clinton Industries Wood Finish Colors for #6190 and #6196 Tables:
Note: Due to variation in monitor displays, actual colors may vary.
|
Winco Vinyl Upholstery Color Choices
Standard Vinyl Upholstery Colors Shown Below
Since colors may not be exactly as shown, we would like to send you the actual color chart.
This will provide a more accurate depiction of the vinyl you will receive on your chair. Call us or go to our contact page to send us an e-mail. All of the above chairs are custom, made to order and are non-returnable.
Twelve additional optional vinyl colors are available with a manufacturer's upcharge.
Good pdf format photos of both the standard and optional colors may be seen at this website link:
Please be warned however. The website colors, as shown on your monitor, may not be an exact
match to the actual colors. We can mail all sample color swatches to you upon request.
Note: The upcharge for these 12 optional colors is $36 per table.
Description: Upholstery material is heavy gauge, expanded vinyl easily cleaned. All foam used in the upholstery products is medium density polyurethane, unless otherwise noted. It is certified to meet Motor Vehicle Safety Standard #302 and California Tech. Bulletin #117.
Regarding TB-133 compliance option, required for tables shipped to healthcare facilities in CA, IL, MN and MA, it is available at a $77 upcharge. This vinyl meets the following specs: Federal Aviation Specification 25.853/ Federal Specification CCC-A-680A/ Boston Fire Dept. Code. This special fire protecting barrier material is
placed under the vinyl upholstery.
If you have a fully sprinklered environment, we can provide you with a waiver/ exemption form for your review and signature. By signing this form, it will eliminate the need for paying an additional charge for this TB-133 option and hold harmless and indemnify the manufacturer from claims having to do with flammability. |
Please note: Above tables are custom, made to order with your color upholstery and are non-returnable.
Copyright 2008, SW Med-Source Inc., All Rights Reserved.
|
| |
Serving hospitals, surgery centers and physician offices since 1995. Home Page
.gif)
